AH PLUS original DENTSPLY

Indications: Permanent sealing of root canals using intracanal pins.

Contraindications: Hypersensitivity to epoxy resins, amines, or other components of this material.

Warning: Avoid contact of a single paste or two pastes that have not yet been mixed with skin or mucous membranes. If this happens, you need to rinse the contact area with a large amount of water. Wear safety glasses and gloves. Contraindications for joint use with other dental materials: None. Preparing the sealer: Before using the sealer, prepare the root canal, rinse and dry it. Mix equal amounts of pastes A and B on a mixing glass or other mixing board using a metal spatula. Blend to a uniform consistency. Do not change the tube caps. Color to color tube white to white. Usage: AN PLUS is used in combination with gutta-percha, silver or titanium pins. Apply mixed AN PLUS to the tip of the canal filler. Eliminate air bubbles in the material and excess material in the canal by moving the canal filler very slowly to the apex. Remove the canal filler very slowly as well. As an exception, a reamer can be used instead of a channel filler. Place the disinfected and dried pin in the mixed AN PLUS and with slow reciprocating movements place it in the channel. Additional gutta-percha pins and lateral or vertical condensation methods may be used. In this case, cover the pins only with a small layer of AN PLUS. Canal unsealing: If AN PLUS was used in combination with gutta-baking pins, canal unsealing can be performed using the traditional gutta-percha extraction technique. Working hours minimum 4 hours at 23 C. Hour of residual solidification 8 hours at 37 C. Cleaning of tools: Spatulas, mixing panels and tools should be cleaned immediately after use with alcohol or acetone. storage: Store at room temperature. Keep the tubes tightly closed. Do not use the material after the expiration date.