All about product
Reviews
Questions
Instructions for use.
1. Squeeze equal lengths of Temp-Bond NE - Accelerator and Temp-Bond NE - Base Paste onto the mixing plate.
2. Dry the prepared tooth and the restoration surface.
3. Mix the pastes thoroughly for 30 seconds.
4. Apply a thin layer of mixed Temp-Bond NE to the inner surface of your restoration. Important: The mixed cement has a working hour of 4 minutes, from the beginning of mixing, at a temperature of 220C and 45-50% humidity.
5. Smoothly place the restoration in the oral cavity. 6. Remove cement residue after the cement has set, approximately 6 minutes after mixing, or 4 minutes in the mouth. 7. Ideal conditions for kneading: 22-240 C and 45-50% humidity. 8. Close the lids of the tubes after use.
Working time: Working hour on the plate at 22 C and 50% humidity - 4 minutes. Conditions for storage. Store in a cold place at a temperature of 16-24C. The material should be used at a temperature of 18-24 C. Working time and setting time accelerates at higher temperature and humidity.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
