All about product
Reviews
Questions
The TANDA Steri autoclave is a horizontal sterilizer of the 18/23 liter class. The autoclave is designed for sterilization of all types of medical, dental, cosmetology instruments in packaging and without textile products.
Adaptability.
Sterilization modes and the design of the device allow you to adapt the device to the needs of your clinic as much as possible. Based on the flow of patients, you can choose a sterilizer with a volume of 18 or 23 liters.
Four sterilization cycles are suitable for the entire range of medical and dental instruments, including instruments with complex designs.
Four sterilization cycles are suitable for the entire range of medical and dental instruments, including instruments with complex designs. The "Prion" mode is specially designed for the complete destruction of submicroscopic infectious particles and viruses.
The design of the internal camera makes it possible to use the working space as rationally and efficiently as possible.
Ergonomics.
The autoclave has compact dimensions and is easily placed in dental offices, beauty salons, where there is often a problem of space. Adjustable supports facilitate correct positioning of the device.
The menu structure is maximally simplified. Digital and light indicators reflect the test results, readiness for work and the next stages of sterilization. The opening handle is located in the lower corner of the door.
Access to the distilled water tank is simple and convenient. The top lid opens easily for filling and cleaning. The presence and volume of water is reflected on the front panel of the autoclave.
Technology
A powerful vacuum pump and an advanced drying cycle ensure a residual moisture level of less than 2%, and a modern steam generator starts immediately after loading, reducing sterilization time without losing quality.
Control and tracking of the main parameters of sterilization are carried out by a built-in microprocessor: temperature, steam pressure, cycle time, cooling and drying processes, pre- and post-vacuum
CONTROL.
The TANDA Steri autoclave is available in two configurations: with a built-in printer and without it. Regardless of the model, the autoclave interface provides for the possibility of connecting an external printer via the RS 232 port.
The presence of a printer enables full control and documentation of the entire sterilization process: temperature readings, cycle time, shut-down data and errors.
A set of testing programs confirms the readiness of the device for operation and compliance with the declared parameters of autoclaving.
Class B sterilization modes
- Material: stainless steel;
- The size of the sterilization chamber 18/23, mm: 232x350/245x450;
- Maximum load 18/23 kg/cm2: 3.07/3.21;
- Water tank volume 18/23, liters: 3.5/4;
- Water consumption for one cycle, ml: 16 - 18;
- Maximum working pressure bar: 2.5;
- Minimum working pressure, bar: – 0.9;
- Maximum sterilization temperature, degrees Celsius: +145;
- Test programs: vacuum test, B&D water vapor penetration test, Helix water vapor penetration and density test;
- USB port, printer port;
- Built-in printer, optional;
- External dimensions 18/23, mm - 445 x 400 x 560/445 x 400 x 670;
- Weight 18/23 kg - 47/53.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
