All about product
Specification
Reviews
Questions
Arde Fine Flow (Arde Fine Flow) is a liquid-flowing composite light-curing material.
Аppointment:
- Class V filling of cavities;
- I-IV as a combination of a capacitive gasket that reduces polymerization stress;
- wedge-shaped defects, surface caries of the occlusal surface.
- The joints are connected to dentin and enamel using conventional adhesive techniques. The material contains fluorine compounds.
Аpplication:
Due to the good adhesion of the material, there is no need for excessive preparation, so preserve the natural dentin as much as possible. The desired depth of the prepared cavity should allow applying material with a thickness of at least 0.5mm. After preparation, rinse with water and dry with dry, oil-free air. For deep cavities, a protective pad containing calcium hydroxide is required.
Introduce the material directly into the cavity from the syringe through the disposable cannula installed on it. For convenience, do not apply the composite in large portions. When applied, the material compresses slightly. Arde Fine Flow remains pliable and flows easily until the moment of illumination. Light curing time - 20 seconds.
After curing, if a matrix was used, remove it. Remains of material can be removed with the help of an Arkansas stone or flexible discs.
Do not use water spray for cooling. Do not use the material for sealing large and medium-sized cavities, or only as a gasket.
Release form: syringe 3.4m
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
