Jen Fissufill, Jen Fissufill TRANSPARENT 2.5g

Jen-Fissufill is a light-curing fluorine-containing composite material for sealing fissures with improved thixotropic properties.

Appointment:

• Sealing of fissures and pits;
• Performing micro restorations;
• The use of the first layer in large composite restorations in cavities with a C-factor equal to 5.
  

Application method:

1. Thoroughly clean the surface to be sealed and treat it with an etching gel containing orthophosphoric acid. Etching time - about 15 seconds (for milk teeth - 90-120 seconds);
2. Rinse with plenty of water;
3. Thoroughly dry the etched surface;
4. The etched surface of the tooth should be white-blue in color, and after drying, it should not be allowed to get saliva, moisture, or any dirt;
5. Apply one drop of the preparation material to the kneading plate and apply a thin layer to the etched surface with the help of a brush;
6. Carry out light curing for 20-30 seconds;
7. Close the syringe tightly immediately after use.
   

Advantages:

• Filler - special bioactive Ca-, P-, F - glass containing;
• Prolonged release of fluorine, calcium and phosphate ions, which determines the carioprotective and remineralizing properties of the material;
• The average particle size of the bioactive filler is 0.4 μm;
• High content of material (about 50%);
• Excellent wear resistance and strength;
• Thixotropy;
• Radiopacity;
• Rheological additives facilitate the penetration of the material into narrow fissures and pits;
• High degree of adhesion to etched enamel.