Parapulpary titanium pins Nordin, D 0.6, 12 pcs + 1 drill

Nordin Parapulpary Pins are not just a threaded and shanked wire, but a solid machined pure titanium rod. The thread is cut with Swiss hour precision, it is easily screwed into the hard tissues of the tooth, providing the most reliable attachment. Each pin has a shank, which facilitates screwing without unwanted stress on the dentin.

Advantages:
- from corrosion-resistant titanium;
- Free from internal tensions;
- soft separation from the carrier;
- self-centering;
- smooth thread cutting;
- maximum fixation;
- Machined from a solid metal block;
- do not have a negative effect on tissues;
- Highest stability.

Application algorithm
1) Drill a place for the pin in the dentin, avoiding proximity to the pulp and limiting to the crown of the tooth
2) Insert the shank of the pin into the standard angle bit
3) Set the appropriate rotation speed (rpm), insert the tip of the pin into the drilled installation location. When rotating, the pin will center, return to the stop and the shank will automatically break off from the pin.
4) To increase the strength of the clutch, the pin can be bent.