Adhesor Cement (80-55ml) CERTIFICATE!

Characteristics: Two-component zinc phosphate cement in the form of powder and liquid. indications: - Lining material for amalgam and composite fillings. - Material for temporary fillings. - Fixation of crowns and small bridge prostheses. - Filling of root canals. Contraindications: The material is not used in case of known hypersensitivity to some of its constituent parts. Side effects: When using cement in the immediate vicinity of the pulp, it is necessary to cover the dentin with a thin layer of calcium hydroxide preparation. Processing (intended for manual mixing): Kneading is carried out on a glass plate with the help of a stainless steel spatula at a temperature of 23 ± 1 ° C. To extend the processing period, it is recommended to mix the cement at a temperature of 20 ° C. It is also recommended to mix the powder with the liquid in portions. Mixing ratio: 1. weight - 2.30 g of powder per 0.5 ml of liquid, i.e. 2.30 g of powder per 0.80 ml of liquid 2. volume - 2 measures of powder and 3 drops of liquid Mixing hour: 2 - 2.5 min Processing time: (from the beginning of mixing to the moment of hardening) 4 - 4.5 min. Hardening time: (from the beginning of mixing to the moment of hardening) 6 - 7 min. The final design of the manufactured gasket or seal can be carried out immediately after their hardening. Fixation of permanent prostheses: Mixing ratio: By weight - 1.4 g of powder per 0.5 liquid, i.e. 1.40 g of powder per 0.80 g of liquid, by volume - 2 measures of powder and 5 drops of liquid. Kneading time: 60 - 90 seconds. Processing time: (from the beginning of mixing to the moment of hardening) 3 - 4 min. Hardening time: (from the beginning of mixing to the moment of hardening) 6 - 8 min.