Bonasil C-silicone, SMALL SET 400*60*40

The impression material Bonasyl based on C-silicone is widely used in modern dentistry and orthodontics for the production of high-quality casts.

The products of the Greek company DMP have repeatedly proven their effectiveness and reliability as a result of use in clinical conditions and private practice. Inexpensive and high-quality material is not inferior to more expensive analogues of European and American brands.

Purpose and application
production of the main layer using double imprint technology;
forming casts using the sandwich technology, in particular for the subsequent production of ceramic veneers;
formation of functional casts for further production of models for private or complete prosthetics;
individual registration of occlusion
The high fluidity of the Bonasil material allows you to make high-precision casts, to achieve the creation of a closing valve with the required level of fixation.

Main characteristics of Bonasil
Bonasil's polysiloxane base makes it easy to mix the mass and quickly mature into a homogeneous material substance necessary for working with it.
Bonasil does not stick to the latex base of the gloves in which the dentist works, and the polymerization of the mass occurs without deviations.
The manufacturing company was able to achieve a unique polymer formula of the material without increasing the cost of the final product.
The chemical properties of Bonasil allow you to cast a plaster mold even a week after the impression is made.

Features of working with Bonasil
The connection of the main mass and the activator takes place within 45 seconds.

Processing the material from the start of work takes about 1 minute.

To solidify the mass, you need to hold the dazzling spoon in the oral cavity for at least 4 minutes, after which the impression is completely ready for further processing.

Molding mass is characterized by high viscosity.

After compression, the shape is restored by 98%.

A linear change in size is allowed by 0.3%.

By changing the amount of activator when mixing the mass, it is possible to increase or decrease the solidification time of the mold.

Temperature also affects the duration of the process. At a temperature standard of +23 degrees, solidification of the mass can be prolonged by lowering the temperature and accelerated by increasing it.

Application method
Measure with a measuring spoon and put on the palm of your hand. At the same time, the excess must be removed. Make an impression on the mass with a measuring stick and squeeze an activating substance onto it in an amount equal to the diameter of the measuring stick. After use, close the entire container with the material immediately.

The components are thoroughly mixed with the fingertips until a homogeneous mass is formed. Place the material in the impression spoon, then quickly apply it to the required area and hold it in the given position until the mass solidifies completely.

When working with Bonasil Light, the ingredients are mixed with a spatula on a special block, after which the above actions are repeated.

Complete set of Bonasil
It is rational to purchase the Bonasil kit, which includes:

main mass with a volume of 400 ml;
corrective mass 60 ml;
Universal activator 40 ml.

The basis of the impression material is polysiloxane. This organosilicon polymer is actively used in various fields and its main advantages are complete safety for humans, absence of toxins and allergens.

Precautions
Starting with Bonasyl, it is recommended to examine the condition of the packaging and make sure that the shelf life is correct. The material should be stored in a closed form, away from heat sources and children.