Heliodent Plus, stationary dental X-ray machine for intraoral radiography

Intraoral stationary dental X-ray machine HELIODENT PLUS

Fast and safe X-ray machine for intraoral imaging.

The easy-to-use HELIODENT PLUS will offer you the best image quality combined with the renowned durability of Sirona equipment.

The high-frequency generator minimizes the spectrum of radiation absorbed by soft tissues.

HELIODENT Plus works on direct current, which reduces the radiation load by 30% compared to low-frequency X-ray machines.

Advantages and features

• • Intuitive management
• • The color of the display reflects the different states of the device
• • Strong hinged connection
• • The tube is mounted on the head with a goniometer

Technical characteristics of HELIODENT PLUS

• • Generator type: high frequency DC generator
• • Mains voltage: 240V 10%, 50 – 60 Hz
• • Focal spot size: 0.4 (IEC 336)
• • Voltage on the X-ray tube: 60/70 kV
• • Tube current: 7 mA
• • Exposure time: set from 0.01 to 3.2 seconds
• • Shooting mode: You can freely choose. Switching between two types of sensing devices - film or visiograph
• • Display: automatic activation of the standby mode after the set time.
• • Focus: standard focal distance to the skin is 20 cm. Optional - 30 cm

The colors of the display reflect the different modes of operation

• • Blue - neutral mode, the device is ready for use
• • White - tube cooling
• • Yellow - the emitter is working
• • Red - error message

Dimensions Heliodent plus

Detailed technical characteristics

1. Nominal voltage: 200 V - 240 V
2. Permissible fluctuations: ± 10%
3. Nominal current: 6-5 A
4. Nominal frequency: 50 Hz / 60 Hz
5. Internal resistance of the network: at 120 V 0.3 Ohm at 200 V - 240 V 0.8 Ohm
6. Internal wiring fuse: 16 A inertial
7. Input power during irradiation: 1.2 kW
8. Input power in standby mode: < 20 W
9. Voltage on the tube: 60 kV / 70 kV with the possibility of switching (max. tolerance ± 5 kV)
10. Tube current: 7 mA (max. tolerance ± 1.4 mA)
11. The shape of the high-voltage curve: high-frequency direct current Residual ripple < 4 kV
12. High voltage frequency: 50 kHz - 70 kHz
13. Emission time: 0.01 s - 3.2 s (max. tolerance ± 10% +1 ms)
14. Ripple/pause ratio: automatic control from 1:1 to 1:60
15. General filtering of the X-ray emitter: > 1.5 AI / 70 IEC 60522
16. Irradiation field: 0 < 60 mm
17. Dose rate: 8.5 mGy/s ±40% at 60 kV 11 mGy/s ±40% at 70 kV
18. Measuring instruments: PTW-Nomex with an ionization space of 1 cm3 or Unfors multimeter
19. Measurement conditions: 200 mm focal length of the device 230 V Nominal voltage
20. Focal spot size according to IEC 60336: 0.4