X-ray DIOX-602. Portable dental X-ray machine

X-ray DIOX-602

Portable X-ray machine DIOX-602 (ДИОКС-602) – a portable dental X-ray system in the form of an X-ray generator with microprocessor control – has the following characteristics:

Device characteristics
1. Since the X-ray generator uses a high-frequency inverter, it provides a stable output of direct current radiation with minimal pulsations. This allows for improved picture quality compared to a similar type of AC device.
2. By reducing losses due to the use of stable constant tension, the DIOX-602 system allows you to take pictures with a lower dose of X-ray radiation, thereby protecting the patient, user and operator from the harmful effects of X-rays.
3. Having a built-in wireless system, the DIOX-602 system greatly facilitates the operating conditions of the device and makes the operator's work more comfortable.
4. The use of an X-ray generator of a new design leads to a decrease in the volume and weight of the device (patent applied for).

Device specifications, technical characteristics
1. Mark Class II
2. Classification Working part of Type B device
3. X-ray generator:
Lamp voltage 60 kV (fixed)
Lamp current 2mA (fixed)
High voltage generator: high frequency inverter
X-ray control method: control through a microprocessor
Time setting range 0.01 ― 1.6 seconds (0.01 s ― step)
4. X-ray lamp
Type ― Stationary anode X-ray lamp
Lamp model: D-081BS (Toshiba, Japan)
The focal size of the lamp is 0.8 mm
Working voltage of the lamp: 50 - Maximum 65 kV
Maximum output power (at 1.0 sec)--------- 600 W
Aiming angle------------------------------------------------ ----- 20°
Full length----------------------------- 77 mm
Maximum diameter--------------38 mm
Weight (Approximately)----------------- 140 g
X-ray coverage area------ 354x354 mm at SID 490 mm
Cooling method: oil immersion (60 º C max.) and convection oil
Lamp cartridge-------------------- ― an insulating cylinder
General filtering------------------------------------------------ ----------- 1.6 mm Al
(internal filtration: 0.8 mm AL, fixed added filtration - 0.8 mm AL)
The maximum voltage of the lamp--------------------------------------------- 65kV
The maximum inverse voltage of the lamp is 75 kV
The minimum voltage of the lamp--------------------------------------------- 50 kV
The maximum current of the lamp---------------- -19 mA
Maximum glow current------------------------------------------------------------ --------- 2.0 A
Incandescence voltage at the maximum voltage current ------------------ 2.9 ― 4.0 V
Thermal characteristics:
Heat capacity of the anode------------------ 6.0 kJ (8.5 kHU – Hausfield units)
The maximum rate of heat dissipation of the anode is 128 W (180 HU/sec)
5. Display - LCD display
6. Scattering "Source - skin" ― 110 mm
7. X-ray radiation field - 65 mm (Circle)
8. Weight 1.8 kg
9. Main body size: 135(Width)x150(Depth)x175(Height)
10. Voltage is used
Battery ― Lithium - polymer battery (24 V DC)
Charger ― MW125KA2402F52 AULT INC
(Input: 100-240V ― 50-60Hz 1.0 A Output: Direct current 24V 1.7 A)