Dual Core Dual Core A3 clicker

Composite material of double hardening, radiopaque, for filling carious cavities and when building a stump. Clicker 9 g (color A3) + 10 nozzles.

Dual Core composite material is actively used in dentistry when attaching pins, reconstructing a tooth stump, creating inserts for a stump.

Cement has the properties of double hardening and is distinguished by reliability and excellent adhesion to metals and fiberglass.

Dual Core material is produced in a syringe or cartridge. Cement can be white, blue and natural.

The use of intraoral nozzles facilitates the use of the drug in the oral cavity.

The chemical composition of Dual Core includes barium aluminosilicate, silicon, bisphenol A, tetraethylene glycol dimethacrylate and impurities.

The compressive strength of Dual Core is 270 MPa, the bending strength is 140 MPa.

How to work with Dual Core
isolate the working field with a rubber dam;
get rid of the remnants of carious dentine changes;
with the help of a small amount of calcium hydroxide, protect the exposed pulp and the cavity floor near it;
following the manufacturer's instructions, apply an adhesive system: etching component, primer and bond (for example, BC Plus), which allows you to perfectly fix stomatal materials to hard dental tissues;
choose the desired color of the cartridge or syringe, apply the material to the prepared cavity using a mixing or interoral nozzle;
the optimal time for work is 1.5 minutes. It is recommended to use a gun when selecting a cartridge as a working tool. And also squeeze out a small portion of cement in advance before installing the mixing nozzle. This procedure will enable uniform extraction of the material from the package;
photopolymerization of the working surface takes place within 40 seconds under the influence of a lamp with a wavelength of 420-500 nm. It is better to keep the light source at a distance of 1 mm from the Dual Core vertically and check the closing of the jaws.
without the use of a photopolymer lamp, chemical polymerization of the material will occur in 4 minutes. Air temperature can affect the duration of polymerization, for example, during manipulations in the front part, a decrease in temperature can prolong the hardening time;
at the final stage, you need to check the strength of the surface using a probe.
Precautions
Dual Core cement material can only be used in dentistry.
Specialists are obliged to strictly follow the instructions for use and take into account the manufacturer's warnings.
It is forbidden to store in free access for outsiders, including children, elderly people and others.
Do not use Dual Core in patients with high sensitivity to the skin, and before use, check the drug for allergic reactions.
The Dual Core preparation should be heated to room temperature before use.
It is forbidden to use the cementing mixture with other preparations containing eugenol.
Skin contact with the softened Dual Core is undesirable and requires immediate removal if the material comes into contact with skin tissue.
In case of direct contact of the material with the mucous membrane of the eyes or the tissues of the mouth, the affected areas should be washed thoroughly with water.
Do not use Dual Core after the expiration date. If there is no polymerization in the work process, the first step is to check the intensity of the lamp, and the second step is to contact the dealer or manufacturer.
Storage conditions
Dual Core composite material should be protected from direct sunlight and heat. The optimal storage temperature is from +2 to +24 degrees. For long-term storage, use the refrigerator.

Sales form - clicker 9 g (color A3) + 10 nozzles.