EVICROL Spofa Evicrol, Evicrol

The composition of the Evicrol kit: 40 g of powder having the main shade No. 21, 3x10 g of powder having additional shades No. 25, 27, 45, 26 g of liquid, 14 g of Evicrol acid pickling liquid, spatulas, 2 paper pads for kneading, 2 measuring spoons for powder. Indications for the use of Evicrol material: • filling of cavities of III, IV and V classes, • fixation of splints, • restoration of a stump of a tooth. application: powder and liquid are mixed with a plastic spatula on special paper to a paste-like state. In most cases, 2 drops of liquid and 2 spoons of powder are enough for one seal. The mixture is produced quickly (within 30-40 seconds). For better adhesion of Evicrol and enamel, the edges of the cavity are beveled at an angle of 45 ° and the enamel around the cavity is etched for 1 minute. Sealing is performed in 1 minute. (The appearance of the seal improves, and its reliability increases, if the polymerization takes place under a matrix, plastic plate or cap.) Within 2 minutes, the mixture hardens and it is left alone. Then the matrix or cap is removed and after 3 minutes, the filling is processed.