Jen-Radiance Molar FW U (Jen Radiance Molar) syringe 6g

Jen-Radiance Molar FW U (Jen Radiance Molar) syringe 6g

Description:

Jen-Radiance Molar is a light-curing, radiopaque and fluorine-containing composite filling material designed for filling Class I and II cavities. Jen-Radiance Molar material has a high degree of transparency and very low polymerization shrinkage (1.63%), which makes it possible to apply it in layers up to 5 mm thick with minimal polymerization stress. The material is very soft, perfectly modeled and adapted in the cavity, filling all irregularities and undercuts and at the same time does not stick to the working tool.

Indications for use:

As a dentin substitute, the base layer of the composite material in direct restorations of classes I and II.
Sandwich technique.
Restoring the stump.

Advantages:

The high content of the material (82%) is due to the new formula of the bimodal filler with an average particle size:
the main radiopaque phase - up to 8 μm;
nanophase – 10 – 30 nm (nanometers).
Compatible and perfectly combined with all types of opaque and enamel composite materials based on methacrylate, designed for aesthetic modeling of enamel surfaces.
Low polymerization shrinkage (less than 1.63%), which is especially important when sealing volumetric cavities in one go.
Excellent manual qualities - the material is plastic and does not stick to the tool.
The coefficient of thermal expansion (CTE) is as close as possible to the tissue of the tooth - 24x10 - 6 cm/cmoC, which causes the absence of thermal stresses in the tooth being restored, which occur when eating ("hot-cold").
High physical characteristics of the material, in particular:
bending strength – 140 MPa;
compressive strength - 340 MPa.
It is produced in the universal transparent shade U to ensure the maximum depth of polymerization.
The uncured material has increased resistance to natural and artificial lighting, which allows for long-term modeling without the risk of premature polymerization of the material.
The radiopaque material contains fluorine.

Method of application:

Jen-Radiance Molar material is applied and polymerized in one portion, up to 5 mm deep.
Filling the volume of lost dentin with portions up to 5 mm thick (rather than layer by layer) significantly reduces the time spent on restoration.
WARNING! Jen-Radiance Molar material requires coverage with a universal composite, we recommend Jen-Radiance.

Complete set:

Syringe 6 g.