SDR capsule 0.25g SDR "smart dentin" 1pc

SDR capsule 0.25g SDR "smart dentin" 1pc

"Smart Dentin Substitute".

The first and only composite for the restoration of the lateral group of teeth with the possibility of filling the cavity with one portion up to 4 mm in volume.
Excellent adaptation due to a comfortable liquid consistency. Combines the manipulation properties of a liquid composite with minimal shrinkage stress.
Has perfect self-leveling. Compatible with all adhesives and composites based on methyl methacrylate.
It is indicated for the replacement of dentin in the restoration of cavities of the 1st and 2nd classes.

Instructions for use:

SDR material feed

Inadequate polymerization due to insufficient illumination

• Check photopolymer compatibility

• Check the duration of the polymerization cycle

• Check the power of the photopolymerizer before each treatment procedure

Dosed compules are a combination of a unidose with a metal cannula tip.

1. Load the dosed compule into the compule gun. Insert the computer into the hole of the gun with the notch facing forward. Make sure that the neck of the computer is inserted first.

2. Remove the color of the cap from the computer. The tip of the computer can be rotated 360 ° for convenient entry into the cavity.

3. When squeezing the material out of the compule, apply light, uniform force. DO NOT USE EXCESSIVE EFFORT.

4. To remove the used cartridge, make sure that the plunger of the applicator gun has returned to its original position, causing the gun handle to retract. Grasp the tip of the computer and pull it out in a downward motion.